Use and Care Manual

5
Control Panel
Hot Water Button
Touch to illuminate, then touch and hold the dispense button for a continuous
flow of water. When dispensing hot water, the automatic continuous flow and
cup sizes are disabled for safety purposes. You will need to keep your finger on
the dispense button until you want the flow to stop.
Room Temperature Water Button
Touch to illuminate, then touch the dispense button for a continuous flow
of water.
Cold Water Button
Touch to illuminate, then touch the dispense button for a continuous flow
of water.
Replace Filter Indicator
When the filters are active, the indicator will be lit up. Once the filters are near
their expiration, the indicator will flash. When the filters' lifetime are up, the filter
indicator will continue to blink and the machine will beep to let you know that
the filters need to be changed.
After powering on, the default temperature will be room temperature and that icon
will light up. After 5 seconds of no use, the temperature will go back to room temperature.
About Your Water Cooler