Use and Care Manual

29
Troubleshooting
Dispense button is flashing and unit is beeping
If the dispense button is flashing and the unit is making a slight beeping sound,
it is alerting you that there may be a leak in the unit. Please refer to page 26.
Water leaking from unit
• Check to make sure that pipes are connected properly.
• Inspect the adapter to ensure that it is connected properly.
• Water pipe may need to be replaced.
Water not dispensing at a hot or cold temperature
This could be caused by an over consumption of water in a short period of time causing
the tanks to empty. Please allow 5 to 10 minutes for the water cooler tanks to refill. Allow
the proper time for the water to heat and cool.
This could be caused by an interruption in the power supply. Please ensure that the
power cord is connected to an outlet. Please make sure that the heating (#9) and
cooling (#8) switches are in the on (I) position.
Troubleshooting