Use and Care Manual

Activate Heating and Cooling

To activate the cold water, push the cooling switch (#14) into the on (I) position by

pushing the top of the switch in. If you do not wish to have cold water you can leave

the switch in the o (O) positon.

To activate the hot water, push the heating switch (#15) into the on (I) position by pushing

the top of the switch in. If you do not wish to have hot water you can leave the switch

in the o (O) position.

Please allow 15 minutes for the hot water to be heated. During this time the heating indicator

light (#2) will be steady. The light will turn o when the heating process is complete. Please allow

1 hour for the cold water to be cooled. During this time the cooling indicator light (#3) will be

steady. The light will be turned o when the cooling process is complete. If any error occurs

in the heating or cooling process, the indicator light will blink.

Before turning on the heating (#15) or cooling switches (#14), ensure water is already ﬁlling

inside the inner tanks by dispensing a drop of water from the hot (#7) and cold (#4) spouts.

Getting Started