Use and Care Guide

14
Changing the Bottle
1. Open the cabinet door.
3. Remove the probe assembly from the empty
bottle. Place the probe assembly on the probe
hanger.
4. Set the empty bottle aside.
2. Slide the empty bottle out of the cabinet.
5. Place a fresh bottle outside of cabinet. Remove the
entire plastic cap from the top of the bottle. Clean the
outside of the new bottle with cloth.
User Guide and Maintenance
Notice: Do not dispense hot, room temperature or cold water if the light is flashing as
you could empty the tanks and cause the dispenser to overheat.
When the Heating (#2) and Cooling (#3) Indicator Lights are flashing this is an alert
that your bottle is empty and will need to be replaced as soon as possible.