Use and Care Guide

11
Activate Heating and Cooling
To activate the cold water, push the cooling switch (#13) into the on (I) position by
pushing the top of the switch in. If you do not wish to have cold water you can leave
the switch in the o (O) positon.
To activate the hot water, push the heating switch (#14) into the on (I) position by pushing
the top of the switch in. If you do not wish to have hot water you can leave the switch
in the o (O) position.
Please allow 15 minutes for the hot water to be heated. During this time the heating indicator
light will be steady. The light will turn o when the heating process is complete. Please allow
1 hour for the cold water to be cooled. During this time the cooling indicator light will be steady.
The light will be turned o when the cooling process is complete. If any error occurs
in the heating or cooling process, the indicator light will blink.
Before turning on the heating (#14) or cooling (#13) switches, ensure water is already filling inside
the inner tanks by dispensing a drop of water from the hot (#8) and cold (#5) water spouts.
Getting Started