Specification Sheet

33
Troubleshooting
Indicator lights are flashing and unit is beeping
If indicator lights #1, #2, #3 are flashing and the unit is making a slow beeping
sound, it is alerting you that there may be a leak in the unit. Please refer to page 23.
Please turn o the switches on the back of the unit and unplug the unit.
Ensure that the bottom of the cabinet is completely dry. The sensor is located in the
back left corner. Make sure there is no water on the sensor.
Once the unit is dry you may plug it back in and turn the switches to the on position
and continue normal use.
Water leaking from unit
• Check to make sure that pipes are connected properly.
• Inspect the adapter to ensure that it is connected properly.
• Water pipe may need to be replaced.
Water not dispensing at a hot or cold temperature
This could be caused by an over consumption of water in a short period of time causing
the tanks to empty. Please allow 5 to 10 minutes for the water cooler tanks to refill. Allow
the proper time for the water to heat and cool.
This could be caused by an interruption in the power supply. Please ensure that the
power cord is connected to an outlet. Please make sure that the heating (#15) and
cooling (#14) switches are in the on (I) position.
Troubleshooting