Full Product Manual

Water leakage.
Pipe not connected properly.
Inspect the adapter to connect the pipe properly.
Water pipe and PE pipe bursng.
Replace the water pipe.
Please allow 15 minutes for the hot water to be heated. During this me
the green heang will be steady. The light will turn off when the pilot lamp
heang process is complete. Please allow 90 minutes for the cold water
to be cooled. During this me the will be steady. green cooling pilot lamp
The light will be turned off when the cooling process is complete. If any
error occurs in the heang or cooling process, the indicator light will blink.
push buon
push buon
E: WATER PURIFIER
7
.
If the appliance is making a soud, there should be leakage. Please check
the PCB on the palte. Repair the machine and dry the PCB, and then
power on agin.