Full Product Manual

replacement
The total flow above is for reference only. It is based on normal water use.
The specific cycle for replacement of filters varies with local water quality
and
water amount consumed.
function
Reduce Chlorine, Taste and odor, Nominal
particular class I, Lead and Cysts.
Special hints:
Filter replacement cycle
D: TROUBLE SHOOTING
6
No water is coming from the spout.
Make sure to completely depress the push buon controls.
Cold water is not cold.
It takes up to one hour aer setup to dispense cold water.
Make sure the power cord is properly connected to a working outlet.
Make sure the back of the dispenser is at least 20 cm from a wall and there is
free airflow on all 20cm sides of the dispenser.
Make sure green power switch on back of dispenser is ON.
If water sll isn't cold, please ask a service agent for assistance.
Hot water is not hot.
It takes 15-20 minutes aer setup to dispense hot water.
Make sure the power cord is properly connected to a working outlet.
Make sure red power switch on back of dispenser in ON.
Nightlight isn't working.
Make sure the power cord is properly connected to a working outlet.
Make sure nightlight power switch on back of dispenser is ON.
Dispenser is noisy.
Make sure the dispenser is posioned on a level surface.
Small water flow.
Low water pressure.
Check the water inlet.
The filter exceeded it's usage me.
Please contact the manufacturer to replace the filter
6 Months or 1500 gallons