Full Product Manual
3. Unpack the product, install the drip tray.
4. Take out the quick joint adapter with valve and install it on the water pipe.
Intall the adapter:
Adapter with Valve PE pipe (3m)
Extra Filter Flushing
Adapter
Tape and Tools (not included)
1. Disconnect the current cold water supply line, as in figure 1.
2. Connect the adapter with valve to the cold water supply line, as in figure 2.
3. Connect the nut on the side of the metal adapter and insert the PE pipe
through the nut. Sck the PE pipe over the side part of the adapter where
the nut was originally, as in figure 3.
4. Crew the nut ghtly into place keeping the PE pipe securely connected to
the adapter with valve, as in figure 4.
5. Note: Do not connect this water line to hot water supply line.
Filter Flushing Instrucons Prior to the First Use
1. Before connecng the other end of the PE tubing to the back of the water
cooler, connect it to the provided A4 System filter flushing adapter into the
le inlet hole in the direcon of the arrow on the adapter.
2. Twist the replacement filter into this A4 System filter flushing adapter unl
it is in place.
Inlet