Full Product Manual

G: MACHINE INSTALLATION
1-2. Loosen the screw of the le or right boom angle
as in the picture below.
3. Use the screw to fix the bracket on the le or right
boom angle of the water dispenser.
4. Make a hole on the floor's surface where the water
dispenser will be installed.
5. Fix the bracket on the floor by screwing ghtly.
6. Tighten the screw.
To prevent the machine from swaying or falling, we have
included an oponal bracket. Please install the bracket
accordingly.
10
If you encounter any issues or have any concerns,
please email us at [e-mail]
or call 1800-256-0695 .
www.avalonproducts.com
Please see our website to learn more about our products
WARNING! To avoid a hazard due to instability of the appliance, it must be
fixed in accordance with the instrucons.