Use and Care Guide

7
Unpacking Your Avalon Water Cooler
The unit has been cleaned prior to departing from the factory. To remove any
dust and debris that may collect during shipping we recommend cleaning the
unit prior to installation For cleaning instructions, see pages 17-22.
• Do NOT plug in the power cord yet.
• Place dispenser upright on a hard and level surface in a cool and shaded
location near a grounded wall outlet. Position the dispenser so there is about
four inches of clearance from the wall on the back and both sides.
• Unpack the product and install the drip tray by inserting it into place.
Locating Dispenser
Getting Started