Use and Care Guide

24
Leak Detection
Our machines are equipped with a high-tech leak detector that will alert you of any
potential leak. At the same time the machine will automatically shut o any intake of water to
prevent a potential flood. In the event of a possible leak, the heating indicator light (#2), cooling
indicator light (#3) and filter indicator light (#4) will start blinking and a beep will sound. Please
check around the machine for any leaking water and determine the source of it. If you find the
source of the leak, you can call our support line for assistance in fixing it. If you do not find the
source of this leak, it may have been caused by accidental spillage of water or from a filter
change. The leak detector is located on the lower back left corner of the cabinet. Unplug your
water cooler and ensure the area around this sensor is completely dry including the notch.
Once the area and sensor are dry, plug the machine back in and the beeping and blinking
indicator lights will stop and the machine will be ready to use as normal again.
User Guide and Maintenance