Use and Care Manual

25
Rinsing, Cleaning, and Draining
3. Pour 0.6 gallons of clean water into the
cold tank. (The cold water tank is the open
cylinder that the white cover was removed
from).
4. Place a large bucket beneath the upper
Drain Outlet (#20) located on the back of
the unit. Remove the drain cover and allow
the water to drain from the unit. Water will
start flowing as soon as the drain cover is
removed.
Cleaning
Caution: The dispenser will heat water to a temperature of approximately 185°F.
It can cause severe burns if not handled carefully. Please use caution while operating
and cleaning. Please allow ample time for any hot water inside the machine to cool
down before draining it.