Use and Care Manual

26
Leak Detection
User Guide and Maintenance
Our machines are equipped with a high-tech leak detector that will alert you of any
potential leak. At the same time the machine will automatically shut o any intake of water to
prevent a potential flood. In the event of a possible leak, the hot water push button (#6), cool
water push button (#7) and cold water push button (#8) will start blinking and a beep will
sound. Please check around the machine for any leaking water and determine the source of it.
If you find the source of the leak, you can call our support line for assistance in fixing it. If you
do not find the source of this leak, it may have been caused by accidental spillage of water or
from a filter change. The leak detector is inside the machine and will need to be left to dry by
itself once any excess water is removed. Unplug your water cooler and ensure the area around
this sensor is completely dry including the notch. Once the area and sensor are dry, plug the
machine back in and the beeping and blinking indicator lights will stop and the machine will be
ready to use as normal again.
Replace Filter Self Clean
Blinking = Heating Blinking = Cooling
Unlock Hot Room Cold