Owners Manual

24
Replace Filter Self Clean
Blinking = Heating Blinking = Cooling
Cold
Room
Hot
Unlock
Leak Detection
Our machines are equipped with a high-tech leak detector that will alert you of any
potential leak. At the same time the machine will automatically shut o any intake of water to
prevent a potential flood. In the event of a possible leak, the hot water push button (#6), room
temperature push button (#7), and cold water push button (#8) will start blinking and a beep
will sound. Please check around the machine for any leaking water and determine the source
of it. If you find the source of the leak, you can call our support line for assistance in fixing it. If
you do not find the source of this leak, it may have been caused by accidental spillage of water
or from a filter change. The leak detector is located on the lower back left corner of the cabinet.
Unplug your water cooler and ensure the area around this sensor is completely dry including the
notch. Once the area and sensor are dry, plug the machine back in and the beeping and
blinking lights will stop, and the machine will be ready to use as normal again.
User Guide and Maintenance