Troubleshooting Guide

28
Activating Self-Cleaning Function
3. Ozone will be produced and injected into the water system, it will kill bacteria
and bio-films typically found in water dispensers. By the end of the cleaning cycle
the ozone will convert into harmless oxygen and will be emitted into the air.
1. To activate, press the self-cleaning switch (#18) and hold in the on position for 5
seconds and release. The switch will immediately go back into the o position.
It is recommended that the self-cleaning feature is used once a week to
sanitize the tanks and water lines.
2. The power/self-cleaning indicator light (#1) will begin to blink. This indicates the
self-cleaning cycle is underway.
4. When the self-cleaning cycle is complete the power/self-cleaning indicator light
(#1) will stop blinking and will be steady.
Please Note: This self-cleaning cycle will take 90 minutes to complete. During
this time do not dispense and drink the water. We recommend you do this during
a period of time when the unit will not be in use for example overnight. During
the cycle you may smell some of the ozone, this is normal.
Cleaning