Specifications

FEATURES AND SPECIFICATIONS PAGE 5
Installation Options:
¥ Residential or Mobile Home
¥ Freestanding Stove or Insert
¥ Bedroom Approved
¥ Alcove Approved
¥ Vertical or Horizontal Vent
Features:
¥ Works During Power Outages (standing pilot)
¥ High Efficiency
¥ Optional Thermostat or Remote Control
¥ Realistic "Wood Fire" Look
¥ Convenient Operating Controls
¥ Variable-Rate Heat Output
¥ Quiet Blower for Effective Heat Distribution
¥ Low Maintenance
Heating Specifications:
Natural Gas LP (Propane)
Approximate Heating Capacity (in square feet)* 600 - 1600 600 - 1600
High Burn Input Rate (In BTU's) 38,500 36,500
Low Burn Input Rate (In BTU's) 18,700 18,000
Efficiency** 81 % 81.5 %
AFUE (Annual Fuel Utilization Efficiency) 72.4 % 73 %
* Heating capacity will vary with the home's floor plan and insulation, natural gas or Propane BTU rating, and outside temperature.
** Efficiency rating is a product of thermal efficiency rating determined under continuous operation independent of installed system.
To measure the net BTU's, multiply the BTU input by the efficiency percentage.
Dimensions
20-1/8"
8" Panels: 28"*
10" Panels: 30"*
12" Panels: 32"*
13"*
5-3/4"*
* Includes trim
23-3/4"
8" Panels: 40"*
10" Panels: 44"*
12" Panels: 48"*
18-5/8"
23-3/4"
Pedestal: 31-1/2"
Brass, Cast Legs: 28"
Black Legs: 26-5/8"
Weight: 175 Lbs.
Measure Clearances
from the Upper Top
The base of the
starter section
is 1-3/8" below the
upper top.
4-5/8"
The base of the starter section
is 1-3/8" below the upper top.
4-5/8"
Fuel: The heater is designed either for natural gas or for propane. Check
the sticker on the top of the gas control valve.
Emissions: This unit has passed the ANSI emission standards for vented room
heaters as tested by OMNI Environmental Services, Inc.
Electrical Specifications: 120 Volts, 1.3 Amps, 60 Hz (150 watts on high)