AB-WINE21DS Thermoelectric Wine Cooler OWNER’S MANUAL Read and save these instructions.
Discover the Difference with Avalon Bay When value matters, Avalon Bay is ready to deliver. As a family-run business, we haven’t lost sight of what really matters to our customers. Our exclusive line of home appliances is both stylish and affordable, so you can create the homescape you desire without having to empty your wallet. Products you can rely on – that’s what value means to us. Please read this manual thoroughly and follow all instructions and safety guidelines.
Contents SPECIFICATIONS …………………………………………………………………………………….4 IMPORTANT SAFETY INSTRUCTIONS ......................................................... 4 ELECTRICAL WARNINGS ................................................................................. 5 IMPORTANT SAFETY INSTRUCTIONS ......................................................... 5 ADDITIONAL SAFETY TIPS ............................................................................... 6 GETTING TO KNOW YOUR WINE COOLER ............................
Specifications MODEL NO. RATED VOLTAGE: CURRENT: POWER CONSUMPTION: STORAGE CAPACITY: TEMPERATURE RANGE: AB-WINE21DS 100-127V / 60Hz 1.8 A (77°F/25°C) 140 watts 21 bottles Lower zone: 51 - 64°F (11 - 18°C) Upper zone: 44 - 64°F (7-18°C) IMPORTANT SAFETY INSTRUCTIONS Your safety and the safety of others are very important. We have provided many important safety messages in this manual regarding your appliance. Please read and obey all safety messages.
This unit should be properly grounded for your safety. The power cord of this appliance is equipped with a three-prong plug, which is compatible with standard three prong wall outlets to minimize the possibility of electric shock. This appliance requires a standard 100-127 volt, 60Hz electrical outlet with a three-prong ground. Plug the wine cooler into a dedicated, grounded wall outlet. Do not, under any circumstances, remove the third (grounded) prong from the power cord.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other appliance. The fumes can create a fire hazard or explosion. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. Do not store food in this wine refrigerator, as the interior temperature may not get cold enough to prevent spoilage.
Staff kitchen areas in shops, offices and other working environments. Farm houses and by clients in hotels, motels and other residential type environments. Bed and breakfast type environments. Catering and similar non-retail applications. List of Main Parts www.avalon-bay.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. HINGE LIGHT SHELF FAN MASK FOOT WATER TRAY GLASS DOOR SEAL LOWER HINGE LED DISPLAY TEMPERATURE DOWN TEMPERATURE UP LIGHT HANDLE ASSEMBLY & INSTALLATION Remove the exterior and interior packaging. Check to ensure all parts are included: 6 shelves 1 handle with 2 screws 1 owner’s manual If any parts are missing, please contact the dealer where you purchased the unit or Avalon Bay customer service. www.avalon-bay.
Handle Assembly Before installation, attach the handle to the front of the unit with the included screws. It may be necessary to push aside the rubber seal on the inside of the door to reveal the screw holes. Avoid over-tightening the screws, or you may cause damage to the unit. Installation 1. Clean the interior surface with lukewarm water, using a soft cloth. 2. Place your wine cooler on a surface that is strong enough to support the appliance when it is fully loaded.
fluctuate. The desired range of 44-64°F/51-64°F(7-18°C/11-18°C) may not be reached. The temperature may fluctuate depending on whether or not the interior light is on or off or whether the bottles are located on the upper, middle or lower section. How to Set the Temperature There are three touch-buttons on the control panel: Increase set temperature by 1°F Decrease set temperature by 1°F Turns on or off the interior light The top compartment has a cooling range of 44-64°F (7-18°C).
CLEANING & MAINTENANCE Cleaning your wine cooler 1. Unplug the wine cooler and remove the bottles. 2. Wash the inside with a solution of warm water and baking soda. The solution should be about 2 tablespoons of baking soda to a quart of water. 3. The outside of wine cooler should be cleaned with mild detergent and warm water. 4. Draw out the water box at the bottom, and wash. Moving your wine cooler 1. 2. 3. 4. 5. Remove all the bottles. Securely tape down all loose items inside your wine cooler.
DETAILED PARTS DIAGRAM 1. 2. 3. 4. 5. 6. 7. 8. Handle Door Door gasket Shelf Cooling fan mask Lamp cover Light Upper door hinge 9. Upper door hinge cover 10. Temperature control board 11. Foaming cabinet 12. Cooling system 13. Exhaust fan 14. Rear panel www.avalon-bay.com 15. Power control board 16. Plastic screw 17. Power cord 18. Power cord clip 19. Condensation tray 20. Feet 21. Lower door hinge 22.
Electrical Diagram www.avalon-bay.
TROUBLESHOOTING PROBLEM Wine cooler does not operate. POSSIBLE CAUSE The circuit breaker has been tripped or a fuse has blown. SOLUTION Reset the circuit breaker or check for a broken fuse. The ambient temperature is too warm. Lower the cooler’s temperature setting. Open the door less frequently. Make sure the door gets closed all the way. Replace the gasket on the door. Replacements are available from the manufacturer.
PROBLEM too much noise POSSIBLE CAUSE Something is blocking the fan blades. The wine refrigerator is not level. The door is not properly installed. The door will not close properly. The gasket sealing the door is dirty or worn out. The shelves are out of position. LED display does not work, or it shows an error. There may be a problem with the main control board. SOLUTION Check the fan to make sure there is no debris or obstruction. If not, contact the manufacturer. See above.
Warranty Terms: During the first year, any components of this appliance found to be defective due to materials or workmanship will be repaired or replaced, at the manufacturer’s discretion, at no charge to the original purchaser. The purchaser will be responsible for any removal or transportation costs. Warranty Exclusions: The warranty will not apply if damage is caused by any of the following: Power failure. Damage in transit or when moving the appliance.
