Use and Care Manual

15
Clock
The Clock button is used to set the Clock.
To set the Clock:
1. Press and hold the Clock button until the Clock indicator starts blinking.
2. Set the time by using the Up and Down buttons. Holding down the buttons longer than 1
second will change the time in fast mode. The clock is a 24-Hour clock so if it is 6:00 PM you would
set the time to be 18:00.
3. To save your settings press and hold the Clock button until the Clock indicator stops blinking.
Use the Chart below to set the 24-hour clock:
Timer
The timer can be used to either turn the unit on or off after a number of elapsed hours. The timer is
adjustable between 1-24 hours in one hour increments.
How to set the unit to automatically turn on:
1. Press the Timer button while the unit and remote are powered off. The On Timer [ ]
indicator will be selected and the timed hour indicator will be blinking.
2. Use the Up and Down buttons to set the number of hours you want to pass before the
unit turns on.
3. Press the Timer button again to set the timer. The timed hour indicator will stop blinking. After
the selected time passes, the unit will automatically turn on.
How to set the unit to automatically turn off:
1. Press the Timer button while the unit and remote are powered on. The Off Timer [ ]
indicator will be selected and the timed hour indicator will be blinking.
2. Use the Up and Down buttons to set the number of hours.
3. Press the Timer button again to set the timer. The timed hour indicator will stop blinking. The
unit will automatically turn off after the selected time elapses.
12-Hour
24-Hour
1:00 PM
2:00 PM
3:00 PM
4:00 PM
5:00 PM
6:00 PM
7:00 PM
8:00 PM
9:00 PM
10:00 PM
11:00 PM
12:00 AM
13:00
14:00
15:00
16:00
17:00
18:00
19:00
20:00
21:00
22:00
23:00
00:00
NOTE: To cancel the timer,
press Power button or set
it at “00”.
Note: To cancel the timer, press the Power button or set the timer to “00”.