Use and Care Manual

14
Fan Only Mode
Fan Only mode is used to circulate the air in your room. No temperature setting is needed. The front
panel lights will be green.
To operate the unit in Fan Only mode:
1. Make sure the power cord is plugged into a power outlet.
2. Press the Power button on the remote control.
3. Press the Mode button until the Fan Only indicator is selected.
4. Press the Speed button to select the fan speed. You can choose between Automatic,
High, Medium, and Low.
Automatic Mode
In Automatic mode, the unit will cool, dehumidify, or heat (certain models) depending on the ambient
temperature. As the temperature in the room changes, the mode and fan speed will change
automatically. The front panel lights will change depending on the mode.
To operate the unit in Automatic mode:
1. Make sure the power cord is plugged into a power outlet.
2. Press the Power button on the remote control.
3. Press the Mode button until the Automatic indicator is selected.
Fan Speed
The Fan Speed button is used to change the fan speed while in Cooling and Fan Only modes.
Press the Fan Speed button to select the fan speed. The Automatic, High, Medium, or Low
indicator can be selected.
NOTE: Fan Only mode does not
require that the exhaust hose be
attached.
Note: Fan Only mode does not require that the exhaust hose be attached.
Note: You will not be able to change the fan speed if the unit is in Automatic or Dehumidify mode.