Owner's Manual
18
6. Clean each water nozzle on the spray bar with a brush or sponge and the soluon. Remove all buildup in
each nozzle opening to assure proper water ow. The spray bar may be removed to facilitate cleaning. If
necessary, vinegar may be used to help remove mineral build-up from the water nozzles.
7. Remove the drain plug inside the water reservoir and clean it. Removing the plug will drain the water
reservoir so it can be cleaned as well. Rinse all surfaces. Make sure the drain plug is reassembled in the
correct posion aer cleaning or the water reservoir will not ll to make ice.
8. Using the sponge and brush, clean the corners, sides, and boom of the ice bin with the cleaning soluon.