User guide

AW900F | AW900F-PAIR
User’s Manual
PAGE 15
Technical Support [phone]
www.avalanwireless.com
Radio Status Information
The Login or Admin pages of the radio’s built-in web browser interface provide many useful pieces of
information that let you know how well the wireless link is working:
Top of Web Page
Version Current version of the radio’s Ethernet interface.
MAC Address Radio’s hardware MAC Address.
Ethernet Status of Ethernet connection: 10 Mbps or 100 Mbps, full or half du-
plex, connected or disconnected.
Uptime Total time radio has been active since last power cycle or hardware
reset.
Device Information
Device Type Access Point (master) or Subscriber Unit (client)
# of Subscriber Units For Access Point only, up to 4 permitted.
Subscriber ID For Subscriber Unit only, the ID selected for this radio.
Current TX Power The output power from 0dBm to 30dBm
RF Status Connected or Searching
Product 900f
Radio Firmware Version 32
Radio Firmware Build 519
Radio Address XX.XX.XX (ex. 00.17.5d)
Statistics
Radio RSSI Received Signal Strength Indicator. The radios operate best with this
value between -30 and -95 dBm
Radio Total Packets # of Ethernet packets received since last reset.
Radio Failed Packets # of packets unsuccessfully transmitted.
Radio Passed Packets # of packets successfully transmitted.
Radio Broadcast Packets Trac simultaneously addressed to all devices on the network.
Radio Unicast Packets Trac sent to a single destination.
Radio Average TX Size Average bytes per packet transmitted.
Radio Average RX Size Average bytes per packet received.