User guide

AW900-SPEC
User’s Manual
PAGE 6
Technical support [phone] www.avalanwireless.com
Here is an example of a relatively quiet environment. If your scan shows that there
is low in-band noise on all channels, you will probably want to leave your AvaLAN
radio in auto-frequency selection mode, allowing it the opportunity to change chan-
nels as needed should interference arise later.
Sample Spectra
Quiet in-band
Harmonics from 13
MHz interference
source
This next example shows a strong in-band signal (in this case caused by another
AvaLAN radio operating in the vicinity.
AvaLAN Radio
transmitting on
Channel 12