Owner manual

AW5800-SPEC
User’s Manual
PAGE 4
Technical support [phone] www.avalanwireless.com
Using the Spectrum Analyzer
1. If you will be using a Windows PC, download the AvaLAN IP Discovery Utility from
ourwebsiteandextractipnder.exefromtheziparchive,placingitonyourdesktop
or in a convenient folder.
http://www.avalanwireless.com >> Support >> Downloads
Note that this utility runs only in MS Windows, not Linux or MAC. If you must use a
non-Windows computer, make sure your subnet mask allows your computer to see
192.168.17.17 and browse to this default address.
2.Runipnder.exeandyoushouldseeawindowsimilartothis:
The AW5800-SPEC should appear in the list of devices found. If it doesn’t, make sure
the wired LAN network properties on your PC are capable of seeing 192.168.17.17
and try again. (If you have changed the IP address and cannot remember what it
is, open up your PC’s subnet mask to 255.0.0.0 and it should appear when you click
the Search button).
3.Fromtheipnderwindow,youcanchangetheTCP/IPpropertiesoftheAW5800-
SPEC if you wish, or just browse to it. Double-click its line in the list, then change
parameters and click “Apply”, or just click “Go to Device Web Page” to launch your
default browser. You can also launch the browser by right-clicking the device line in
theopeningipnderwindow.
4. Your browser window will open the AW5800-SPEC’s login page: