Owner's manual

High Security Supplement

PAGE 4

Technical support (650) 384-0000 www.avalanwireless.com

5. Next, you will be provided with a popup to en-

ter the encryption key and method (128, 192 or

256-bit). (You will be forced here if you are reset-

ting, or can choose "Input Key" after logging in. The

encryption key is a hexadecimal number, 32 digits

for 128-bit encryption, 48 digits for 192-bit and 64

digits for 256-bit. Enter the digits as 0 - 9 and a - f

or A - F (case independent). If you enter fewer than

the specied number of digits (not recommended),

the remainder will be padded with zeros.

6. Once the encryption module has been pro-

grammed, you may login to access the other fea-

tures. "Self Test Results" will simply display "Self

Test Passed" in the status box. If it does not, con-

tact AvaLAN Technical Support. Module Firmware

Version displays that information in the status box

and may be useful to the aforementioned AvaLAN

Technical Support staff.

7. When you are nished with the conguration of the encryption module, discon-

nect the USB cable and replace the cap on the connector. Then cycle power through

the LAN cable to restore the wireless radio to normal operation.