Owner manual

PAGE 37
Technical support (650) 384-0000 www.avalanwireless.com
AW2400mSPI
User’s Manual
17. The peak and average received power at each frequency is displayed in loga-
rithmic graphical form.
18. By clicking the "Data Terminal" tab at the top of the window, you are provided
with a rudimentary means of exchanging data between the connected radios.
19. The Data Terminal Port (the lower numbered COM port associated with the
radio) should be selected from the drop down box near the top of the window.
Data terminal settings (Baud rate, etc.) are pre-selected here from the boot
conguration.Theymaybe overridden ifdesiredwithout affectingtheboot
conguration.Click "Connect" toestablish communicationbetween the Data
Terminal and the radio. The text box to the right of the "Connect" button should
give a message verifying a successful connection. The "Connect" button now
changestoa"Disconnect"button.NotethatreturningtotheBootConguration
tab and modifying and rebooting the radio will automatically disconnect the
Data Terminal port and pop up an alert message to that effect.
20. Text or binary data mode can be selected using the Mode buttons. Data to be
transmitted should be entered into the one-line black box near the bottom of