User Manual

AW2400-SPEC User’s Manual
PAGE 6
Technical support [phone] www.avalanwireless.com
Here is an example of a relatively quiet environment. If your scan shows that there
is low in-band noise on all channels, you will probably want to leave your AvaLAN
radio in auto-frequency selection mode, allowing it the opportunity to change chan-
nels as needed should interference arise later.
Sample Spectra
This next example shows the result of operating the AW2400-SPEC in close proximity
to a Bluetooth and three WiFi sources. Most of the detected signals are below the
AvaLAN channel frequencies and are transient in nature. Because AvaLAN radios use
sub-packet error correction, transient blips will have a very small effect.