Manual

4G Cellular Ethernet Gateway
www.avalanwireless.com
Corporate headquarters :: [phone]
Technical support :: [phone]
The AvaLAN 4G Cellular Ethernet Gateway is shipped to you already pre-provisioned with your chosen Cellular Service
Provider. To verify this, simply provide power to the unit using the accompanying Power Over Ethernet adapter and
connect a laptop or other computer capable of browsing the Internet to the POE’s Data In port. The LEDs visible through
the window in the top of the AW-NetDrop will indicate if power is applied, if the local Ethernet is connected and if a
cellular connection has been established.
The AW-NetDrop is a DHCP Server on the local Ethernet and
can provide your computer with an IP address. Or if you
wish, you can manually congure it. The local IP address
of the AW-NetDrop is set by default to 192.168.1.1 and by
browsing to this address, you should be able to see the
built-in browser interface shown here. This built-in inter-
face has a very comprehensive instruction manual inte-
grated with it and should provide all the help you need to
congure the AW-NetDrop’s router functionality and to set
it up as a mini-ISP for a fringe IP device that you can access
via the Internet and Cellular network.
If you encounter any difculties, you may need to consult
with your company’s IT department or Cellular Data pro-
vider. You may also contact AvaLAN Technical Support or
seek answers from our website, www.avalanwireless.com.
AW-NetDrop Quick Start Guide
LAN Cable to local
computer or device
LAN Cable
to AW-NetDrop
120 VAC Power
Status Display LEDs
LAN Cable from POE
11.18.2011