Instruction Manual

AW5800xUser’s Manual
PAGE 3
www.avalanwireless.com
Technical support :: [phone]
System diagram
Quick setup
1) Plug in the AW5800x using the supplied injector and power adapter.
2) Connect an Ethernet cable from each AW5800x to a network device.
3) Send Ethernet trafc. For troubleshooting, see Page 5.
Each AW5800x radio automatically selects the best radio channel, encrypts the Ethernet trafc, and transports the data wirelessly to
its mate. Any Ethernet device can be connected to the AW5800x. The AW5800x functions in place of an Ethernet cable and provides a
transparent wireless point-to-point Ethernet cable replacement. Crossover cables are not necessary as the AW5800x automatically
senses the device (client or switch).
5.8 GHz
digital
Ethernet
bridge
RF connector
RP-TNC
RF connector
RP-TNC
AW5800x
AW5800x
CAT5 cable
(not included)
CAT5 cable
(not included)
CAT5 cable
(not included)
CAT5 cable
(not included)
Power over
Ethernet injector
Power adapter
110 VAC
Power
9 to 48 VDC
Data
Ethernet
RJ45/10BaseT
Power adapter
110 VAC
Power over
Ethernet injector
Data
Ethernet
RJ45/10BaseT
Power
9 to 48 VDC