User Manual
AW5800mTUser’s Manual
PAGE 7
www.avalanwireless.com
Technical support :: (650) 384.0000
User’s Manual Requirements
In order to inherit AvaLAN’s FCC Certication, compliance requires the following be stated in the user’s manual:
FCC Notices
Adherence to the following is required:
IMPORTANT: The AW5800mT OEM RF Modules have been certied by the FCC for use with other products without any further certication (as per
FCC section 2.1091). Changes or modications not expressly approved by AvaLAN could void the user’s authority to operate the equipment.
IMPORTANT: OEMs must test their nal product to comply with unintentional radiators (FCC section 15.107 and 15.109) before declaring compliance
of their nal product to Part 15 of the FCC Rules.
IMPORTANT: The AW5800mT OEM RF Modules have been certied for xed base station and mobile applications. If modules will be used for por-
table applications, the device must undergo SAR testing.
FCC-Approved Antennas (5800MHz)
Fixed base station and mobile applications
AvaLAN Modules are pre-FCC approved for use in xed base station and mobile applications. When the antenna is mounted at least 20 cm (8”) from
nearby persons, the application is considered a mobile application.
Portable applications and SAR testing
When the antenna is mounted closer than 20 cm to nearby persons, then the application is considered “portable” and requires an additional test be
performed on the nal product. This test is called the Specic Absorption Rate (SAR) testing and measures the emissions from the module and how
they affect the person.
RF exposure (This statement must be included as a CAUTION statement in OEM product manuals.)
WARNING: This equipment is approved only for mobile and base station transmitting devices. Antenna(s) used for this transmitter must be installed
to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or
transmitter.