Specifications

Page 21
x-sls Tower
System Description: 2 Way (6.5” Long Throw Woofer and Treated Fabric Dome Tweeter)
Enclosure Type: Vented, Rear Firing
Frequency Response (+/-3dB): 45Hz- 20KHz
Nominal Impedance: 8 Ohms
Sensitivity: 87dB @ 1w/1m
Crossover: 1750Hz, 2nd Order
Raw Weight: 40 lbs each / 18.18 kg each OR 80 lbs pair / 36.36 kg pair
Shipping Weight: 46 lbs each / 20.9 kg each OR 92 lbs pair / 41.8 kg pair
Dimensions (ea): 8.5” W x 37.7” H x 12.125” D / 216mm W x 957mm H x 308mm D
x-mtm D’Appolito Tower
System Description: 2 Way (Dual 6.5” Long Throw Woofers and Treated Fabric Dome Tweeter)
Enclosure Type:
Vented, Rear Firing
Frequency Response (+/-3dB): 40Hz-20KHz
Nominal Impedance: 8 Ohms
Sensitivity: 90.5dB @ 1w/1m
Crossover: 2100Hz, 2nd Order
Raw Weight: 50 lbs each / 22.72 kg each OR 100 lbs pair / 45.44 kg pair
Shipping Weight: 58 lbs each / 26.36 kg each OR 116 lbs pair / 52.72 kg pair
Dimensions (ea): 8.5” W x 46.7” H x 16.5” D / 216mm W x 1186mm H x 419mm D
x-pls Towers w/ Powered Sub
System Description: 3 way Towers (Passive 2 Way D’Appolito with Active 10” Subwoofer)
2-Way D’Appolito System Same as x-cs Monitor
3 Way Frequency Response: 26Hz-20KHz (+/-3dB)
Enclosure Type: Vented, Slot Port on Top of Front Panel
Rated Power: 150 Watts
Input Type: Speaker Level or Preamp Level Single Ended (RCA)
Input Sensitivity: 150mV
Signal-to-Noise Ratio: 83dB (Unweighted)
Distortion: <0.08% 28Hz-150Hz
Subwoofer Frequency Response: 26Hz-150Hz, -3dB
Crossover Frequency: Adjustable, 40Hz- 150Hz
Electrical Power Requirement: 115VAC, 60Hz, 10A Receptacle
Raw Weight: 70 lbs each / 31.81 kg each OR 140 lbs pair / 63.62 kg pair
Shipping Weight: 78 lbs each / 35.45 kg each OR 156 lbs pair / 70.9 kg pair
Dimensions (ea): 8.5” W x 46.7” H x 16.5” D / 216mm W x 1186mm H x 419mm D