Specifications

Page 20
Technical Specications
x-ls Monitor
System Description: 2 Way (6.5” Long Throw Woofer and Treated Fabric Dome Tweeter)
Enclosure Type: Vented, Rear Firing
Frequency Response (+/-3dB): 55Hz- 20KHz
Nominal Impedance: 8 Ohms
Sensitivity: 87dB @ 1w/1m
Crossover: 1750Hz, 2nd Order
Raw Weight: 32 lbs pair / 14.5 kg pair
Shipping Weight: 40 lbs pair / 18.18 kg pair
Dimensions: 8.5” W x 13.5” H x 12.125” D / 216mm W x 343mm H x 308mm D
x-cs D’Appolito Monitor
System Description: 2 Way (Dual 6.5” Long Throw Woofers and Treated Fabric Dome Tweeter)
D’Appolito Alignment optimized for horizontal or vertical mounting orientation
Enclosure Type: Sealed (F3 = 65Hz)
Frequency Response (+/-3dB): 65Hz-20KHz
Nominal Impedance: 8 Ohms
Sensitivity: 90.5dB @ 1w/1m
Crossover: 2100Hz, 2nd Order
Raw Weight: 33 lbs each / 15 kg each
Shipping Weight: 41 lbs each / 18.63 kg each
Dimensions: 20” W x 8.5” H x 15.5” D / 508mm W x 216mm H x 394mm D
x-sub
System Description: Powered Subwoofer (8” Polymer Cone Woofer)
Enclosure Type: Vented, Slot Port on Top of Front Panel
Rated Power: 150 Watts
Input Type: Speaker Level or Preamp Level Single Ended (RCA)
Input Sensitivity: 150mV
Signal-to-Noise Ratio: 83dB (Unweighted)
Distortion: <0.08% 28Hz-150Hz
Frequency Response: 28Hz-150Hz, -3dB
Crossover Frequency: Adjustable, 40Hz- 150Hz
Electrical Power Requirement: 115VAC, 60Hz, 10A Receptacle
Raw Weight: 38.15 lbs / 17.34 kg
Shipping Weight: 45 lbs / 20.45 kg
Dimensions: 9” W x 17.75” H x 12.875” D / 228.6mm W x 451mm H x 327mm D