Specifications
Page 10
Dedicated LFE Input
This is the recommended input to use if your x-sub is part of
a multi-channel home theater with discrete outputs on the
preamplier/processor for an “LFE” (Low Frequency Effects)
channel. There is only a single RCA for this input (pictured
at left in the illustration) because the signal has already
been summed into a mono channel in the preamplier and
it bypasses the crossover ltering because that function is
controlled by the LFE processing functions upstream. Short of
level matching with the gain and using the polarity switch (0
or 180º), this is the easiest method of connection for using the
x-sub in a home theater application. The dedicated LFE input
is labeled “Subwoofer Input”. Remember that you must make
sure the preamplier/processor has been congured to enable
the LFE channel output so the x-sub will have signal.
Picture of
MFW 15 LFE
connection