Specifications

C2-6204 SERIES OPERATION MANUAL

7.4 Computer & Video outputs

The output resolution from your unit is set in the ‘Adjust outputs’ menu using the

‘Output res.’ menu item. The signal format is also selectable in that menu, with the

following available:

Signal DVI-I output

Analog RGBHV



RGsB (sync on green) 

RGBS (composite sync at TTL levels) 

YUV/YPbPr (including tri-level)



DVI-D 

This is altered in the ‘Adjust outputs’ menu, where the user can select between the

above outputs. The DVI-D output is always active and follows the color-space of

the analog signal.

YUV/YPbPr (component) outputs can also be switched to RGsB (sync on green)

mode if desired -see ‘Adjust outputs’ in this manual for more information.

7.5 SDI/HD/3G-SDI output

These are the maximum available serial digital interface outputs supported:

 270Mbit/s (standard definition, 480i, 576i)

 1.485Gbit/s (720p, 1080i60 / 1080p30)

 2.97Gbit/s (1080p60)

As set by the ‘Output res’ resolution – the DVI-I output and SDI output are always at

the same resolution, with the SDI output only being active when an SD/HD/3G

standard is being output.