User Manual

Installation and Application
www.avaccess.com
5
[e-mail]
Application
Users can connect a PC to USB Host port of the transmitter. Insert the PC to HDMI
In 1/2 port of the transmitter. All USB devices connected to the receiver will be
connected to the PC. The display connected to HDMI Out 1/2 of the receiver will
display the signal from HDMI In 1/2.
PC
Display
Display
Transmitter
Receiver
Power
Supply
Camera
Keyboard &
Mouse
HDMI Out
HDMI
Out
USB
Devices
HDMI In
HDMI In
USB Host
Cat 5e/6/6a/7
Extend 1 Extend 2
Note:
 The Cat 5e/6/6a/7 cable used must be within 60m/197ft.
 With one-way PoC supported, one power adapter is needed to be
connected to the receiver to power both units.
 The two USB 2.0 ports supports 1A can be connected to high-power USB
devices such as USB camera, USB hard disk.