User Manual

Installation and Application
www.avaccess.com
4
[e-mail]
No.
Name
Description
from HDMI In 1 and 2 respectively.
6 USB Device
Connect to USB devices.
Note: USB ports support the USB 2.0 stan
dard with a
maximum of 1A for the top two ports and 0.5A on the bottom
two ports. Before connecting a USB 3.0 device, confirm the
compatibility with USB 2.0.
7 USB Device LED
Breathing Status: No USB device is connected.
Solid on: USB devices are linked.
Flashing: USB data is being transmitted.
Installation and Application
Brackets Installation
Note: Before installation, please ensure the extender is disconnected from the
power source.
Steps to install the device in a suitable location
1. Attach the installation bracket to the enclosure using the screws that were
provided in the package separately. The bracket height can be adjusted
up/down or bracket face up or down.
2. The bracket is attached to the enclosure as shown.
3. Repeat steps 1-2 for the other side of the unit.
4. Attach the brackets to the surface you want to hold the unit against using
the screws (provided by others).
5. Repeat steps 1-4 to install the receiver.