User Manual

Introduction
www.avaccess.com
3
[e-mail]
Panel
Transmitter
1 2 3 54 6 7 5
No.
Name
Description
1 Status LED
On: HDMI data is being transmitted.
Off: No signal.
2
UTP Out
Connect to UTP In port of the receiver.
3 DC 12V
Connect to the provided power adapter. With one-way PoC
supported, one power adapter is needed to be connected to
the receiver to power both units.
4 Power LED
On: The device is powered on.
Off: The device is powered off.
5 HDMI In (1&2)
Connect to HDMI sources.
HDMI In 1 and 2 signals are extended to HDMI Out 1 and 2
respectively.
6
USB Host
Connect to a host PC.
7 USB Host LED
Breathing Status: No USB device is connected.
Solid on: USB device is linked.
Flashing: USB data is being transmitted.
Receiver
1 2 3 54 6
5
7
No.
Name
Description
1 Status LED
On: HDMI data is being transmitted.
Off: No signal.
2
UTP In
Connect to UTP Out port of the transmitter.
3 DC 12V
Connect to the provided power adapter.
With one-way PoC
supported, one power adapter is needed to be connected to
the receiver to power both units.
4 Power LED
On: The device is powered on.
Off: The device is powered off.
5
HDMI Out (1&2)
Connect to HDMI displays. HDMI Out 1 and 2 output signals