User Manual

Control of the Switcher
www.avaccess.com
6
[e-mail]
Control of the Switcher
You can choose to switch input sources at your convenience through front panel
buttons, IR remote or Hotkey function.
Front Panel Control
Users can choose to use front panel buttons to do basic switching operations.
Connect the switcher as required and power on all the attached devices.
Press the corresponding button (Input1/2/3/4)
to select HDMI In (1/2/3/4) as input source
IR Remote Control
The included remote handset can be used to turn on and off a CEC-enabled
display device and to switch four HDMI sources to one display device.
Point the remote directly at the IR windows on front panel or at the IR extension
cable connected to the "IR Ext." on rear panel.