User Manual

EDID Management
www.avaccess.com
7
EDID Management
When an HDMI video source boots up, it normally communicates
with the output device using the EDID communication protocol
based on the built in EDID information. The source device then
produces a signal with the optimum resolution that is compatible
with the output device.
4KMX42 Supports EDID copy insert priority function
 When connect to a monitor, copy EDID of the monitor directly
 When connect to two monitors, according to the access time
of the monitors then carried out copy EDID in sequence. If
HDMI OUT 1 inserts first, the EDID of HDMI OUT 1 shall be
copied; otherwise, the EDID of HDMI OUT 2 wil be copied
Note: While power on after connection of two monitors, the EDID
of HDMI OUT 2 wil be copied.