User`s manual

AVY16-ES100 User’s Manual AuviTran
17
14.2.6.5 Front panel LED description
When in a redundant mode, LED located on AVY16-ES100 front panel indicates current
state of each port. This is really useful to quickly know how to plug the cables, without
using ES-Monitor software.
When in standard mode, the behaviour remains the same as usual: all LED turned off if
no cable is connected. LED blinking in blue when an active link is connected.
There are three different behaviours for the LED in redundant mode: standstill, blinking
and pulsating.
- Standstill top LED indicates that port is an EtherSound OUTPUT port.
- Pulsating top LED indicates that port is an EtherSound INPUT port.
- Blinking bottom LED reflects link activity.
Redundant A and B ports also have two colours to reflect link quality, like in ES-Monitor
software.
- Red LED indicates a disconnected or faulty link.
- Blue LED indicates a proper link.
In “Redundant IN” mode, front panel displays following information:
- 3
rd
port top LED is always pulsating in blue, indicating that this is the Input port.
- 3
rd
port bottom LED is blinking if a cable is connected, and if there is a stream on
the cable.
- A and B ports top LED are always standstill, indicating that they are Outputs
ports. Red if cable is disconnected or if quality is poor. Blue if cable is connected,
with good quality.
- A and B ports bottom LED blinking when cable is connected, and if there is a
stream on the cable.
In “Redundant OUT” and “Switch OUT” mode, front panel displays following information:
- 3
rd
port top LED is always standstill in blue when cable is connected, or turned off
when no cable is connected, indicating that this is the Output port.
- 3
rd
port bottom LED is blinking if a cable is connected, and if there is a stream on
the cable.
- A and B ports top LED are always pulsating, indicating that they are Input ports.
Red if cable is disconnected or if quality is poor. Blue if cable is connected, with
good quality.
- A and B ports bottom LED are blinking when cable is connected, and if there is a
stream on the cable.