User`s manual

11-5 EtherSound Networks
Tree Views tab selector allows user to select device from three different representations
of EtherSound networks:
• List: Classic display of all EtherSound networks and devices
• Tree: Display devices in hierarchy view, only when hierarchy was found or built
• Group: Display devices in group view as defined by user
EtherSound network Tree Views available
By right clicking either on a network or a device, a popup menu will be displayed for user
to set several parameters. Note that available options depend on network/device
selection.
Menu Submenu Function
Network Reset all Reset all networks
Build all hierarchy Build hierarchy for selected network
Remove network Remove network from offline mode
Clear all routing Mute all EtherSound channels
Force to mono dir Force all devices to mono dir mode
Force to ring mode OFF Force all devices to be in normal mode
Rename Rename network
Device Rename Rename device
Start of BiDir Loop Set device as start of Bi-Dir loop
End of BiDir Loop Set device as end of Bi-Dir loop
Write to Nonvolatile Memory Write all device parameters to its
Nonvolatile memory (Write to all
devices when network is selected).
Restore from Nonvolatile Memory Write all device parameters to its
Nonvolatile memory (Restore from all
devices when network is selected).
Reset device Reset device to restore default
parameters
Group Group Name Add/Remove device to/from group
Ring Ring Active Checked if device is in ring mode
Preferred PMaster Set device as Preferred Primary
Master
When a group is selected, dedicated popup menu is displayed.
Menu Function
Remove all groups Remove all defined groups
Add group Add a new group
Rename group Rename selected group
Remove group Remove selected group
AVS-ESMonitor – User’s Manual AuviTran 22