User`s manual

Serial port Interpreter
AVM500-ES User’s Manual v2.1 AuviTran 2010
47
10.3.5 Get output patch
Syntax:
<Dest_Port><Dest_I/O>=?<CR>
Answer:
<Dest_Port><Dest_I/O>=<Source_Port><Source_I/O><CR>>
Or
<Dest_Port><Dest_I/O>=M<CR>>
Where:
<Dest_Port> is a letter in {A, B, C, D, or E} that represents the destination port.
<Dest_I/O > is a 2 decimal digit that represents the destination output number.
<Source_Port> is a letter in {A, B, C, D, or E} that represents the source port.
<Source_I/O > is a 2 decimal digit that represents the source output number.
M is a letter to defined Muted output (i.e. Not Patched)
For instance:
Get Patch information for Output 12 of port A:
Command send: A12?
Answer received: A12=E05
Get Patch information for Output 64 of port D
Command send: D64?
Answer received: D64=C12
Get Patch information for Output 03 of port B:
Command send: B03?
Answer received: B03=M
Get Patch information for Output 60 of port C:
Command send: C60?
Answer received: C60=M