TM T H E PE RF O R M A N C E YOU NE ED 2-In/1-Out HDMI Selector Switch with Remote Control Please read this user’s guide before using your new HDMI Selector Switch.
Package Contents HDMI Selector Switch AC Adapter Remote Control Velcro Strips (2 pairs) User’s Guide Quick Start Features Supports full HD 1080p resolution for the best possible HD picture and digital sound. Connect two high-definition components to a single HDMI jack, and switch between them remotely. Simplay HD™ ready. Gold-plated connectors improve signal and reduce interference.
3
DC 5V 4 4
Setup 1. Connect your HD audio/video device to the selector switch’s IN1 or IN2 port using an HDMI cable (not included). 2. Connect your HDTV to the selector switch’s OUT port using an HDMI cable (not included). 3. Connect the provided AC Adapter to the selector switch’s DC 5V jack, and then plug it in to a standard household outlet. 4. Use the supplied Velcro strips (optional) to secure the selector switch to the wall or other flat surface. 5. Press G/SELECT on the selector switch to turn it on.
G/SELECT Power Select device Power Choose the connected audio/ video device.
Use Your Devices 1. To switch between devices, press button 1 or 2 on the remote control or G/SELECT on the selector switch. 2. To power off the selector switch, press G on the remote control or press and hold G/SELECT for three seconds on the selector switch. Replacing the Battery 1. Press the tab on the battery compartment tray and slide the battery compartment tray out. 2. Insert a new 3V, CR2025 battery, positive (+) side up. 3. Slide the tray back into the battery compartment until it clicks.
b Battery Notes: Keep button-cell batteries away from children. Swallowing a buttoncell battery can be fatal. Dispose of batteries promptly and properly. Do not burn or bury them. Use only a fresh battery of the required size and type. Storing the AC adapter The blade plate on the included AC adapter is detachable for easy storage. Carefully press OPEN to unlock and remove the blade plate. w Caution: Only use the supplied blade plate for this adapter.
Troubleshooting Problem Possible Solutions Make sure the power adapter is plugged in. Check that the A/V device’s power cord is plugged in properly. LED doesn’t light Try another device in case the first one isn’t working. Make sure the HDMI cable is not damaged. Make sure all devices in the signal-chain are HDCP compliant. Turn off the TV, then turn it back on.
Has video but no audio Remote control does not work LED is flashing Make sure your TV’s input is set to HDMI Make sure your HDMI cable is version 1.1 or higher. Press G/SELECT or 1-2 on the remote again to reselect your input source. If the TV can only support 2-channel audio, change the source device’s audio settings to “2-channel (PCM)” output. Turn off the TV, then turn it back on. Change the battery. Make sure there are no obstructions between the remote and switch.
Specifications Video Amplifier Bandwidth............................ .......................................225MHz/6.75 Gbps Single Link Range...... Max. 1080p from source Vertical Frequency Range............... 50/60 Hz HDMI Input Connector......... Type A 19-Pin x 2 HDMI Output Connector...... Type A 19-Pin x 1 Switch Source Indicator..................... 2 LEDs Power Consumption...................... Max. 3 W Power Supply.......................................5V, 1A Dimensions........ 7×3×1.
try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Ignition L.P. may cause interference and void the user’s authority to operate the equipment.
Should a problem occur that is covered by this warranty, take the product and the sales receipt as proof of purchase date to the place of purchase. Ignition L.P. will, at its option, unless otherwise provided by law: (a) repair the product without charge for parts and labor; (b) replace the product with the same or a comparable product; or (c) refund the purchase price. All replaced parts and products, and products on which a refund is made, become the property of Ignition L.P.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. You may contact Ignition L.P. at: Ignition L.P., 3102 Maple Ave.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Simplay HD is a trademark of Simplay Labs, LLC. Complies with the European Union’s “Restriction of Hazardous Substances Directive,” which protects the environment by restricting specific hazardous materials and products.
Protect the environment by recycling used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. Get more from your audio and video equipment. See what you’ve been missing. With Auvio, you control the experience. Auvio was established by a group of technophiles to provide high quality audio and video products without the high sticker price. The Auvio philosophy is for you to experience audio and video as it was intended to be: pure and distortion free.
