® WIP20S Skype™ Telephone Adapter Instruction Manual Designed for Skype™ www.auvivoip.
www.auvivoip.
Notices Section 1 Regulatory Compliance Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Section 1 Trademarks © 2006 Auvi Electronics N.A., LLC. All rights reserved. Auvi Electronics N.A. “Auvi” shall not be liable for any errors contained herein or for any damages arising out of or related to this document or the information contained herein, even if Auvi has been advised of the possibility of such damages. This document is intended for informational and instructional purposes only.
Section 2 Introduction Diagram Connect telephone cord Audio out Power in Mic in Audio in Package Contents The contents are specifically designed to be used only with the WIP20. 3.5mm-to-3.
Section 3 Skype™ Software The first step to using the WIP20 is to install Skype™ on the computer. This section describes how to download and install Skype™, create a Skype™ account and add contacts. Installing Skype™ Software If you already have the latest version of Skype™ on your computer, go to the next section. If you don’t have the latest version, please follow the steps below. 1. Access the web and go to: http://www.skype.com. 2. Double-click the download button for Windows®. 3.
Section 3 7. In the next window, set up additional tasks, if needed, then click NEXT. 8. Click FINISH in the last window to complete the installation. Creating a Skype™ Account 1. In the “New Users Create a Skype Account” tab, enter the required information. Click NEXT. 2. “Your Skype Personal Profile” Enter the information in the approiate text boxes. Click UPDATE.
Section 3 Adding a Skype™ contact 1. Once logged-in to your account, go to the main Skype™ account window. 2. From the menu at the top of the window, select Tools, and then Add a Contact. 3. Enter the name of another Skype™ user in the appropriate text box, then click NEXT. 4. Make the appropriate selections, then click OK.
Section 3 5. The contact will be added when authorized. Click FINISH. The contact has been added. To view the contact list, select the Contacts tab from the main Skype™ window.
Section 3 SkypeIn SkypeIn is a paid service provided by Skype™. This service allows your Skype™ account to be called from any traditional landline phone or mobile phone. When you are signed up with SkypeIn and your phone rings, simply pick up the handset and answer like you would normally do with a traditional home phone. To learn more about SkypeIn, please visit http://www.skype.com. SkypeOut SkypeOut is a paid service provided by Skype™.
Section 4 Hardware Connection This section explains how to physically connect the WIP20 to your computer. Connecting the WIP20 1. Connect the line-in cables to your sound card on the back of your computer. Pink = MIC jack Green = SPKR jack 2. Connect the line-in cables to the WIP20. Pink = Mic in Green = Audio in 3. Connect the AC adapter to the “Power in” jack on the back of the WIP20. 4. Connect a traditional or cordless phone to the RJ-11 jack on the front of the WIP20.
Section 4 5. If you already have speakers connected to your sound card, unplug them and reconnect them into the jack labeled “Audio out” on the back of the WIP20.
Auvi Software Installation Section 5 You are now ready to install the Auvi Interface Software Application. This section will give you the step-by-step process to correctly install the interface. Be sure to fill in all the necessary information to access and run the program. Installing the Auvi Interface 1. Insert the Software Installation CD in the CD-ROM tray. When the “Welcome” window appears, click NEXT. 2.
Section 5 5. If you want a desktop icon, check the box and click NEXT. 6. To make changes, click BACK. If not, proceed by clicking INSTALL. 7. This window asks to run the application immediately after install has completed. To approve, click NEXT. 8. This step is your cautions and warning window. You must click NEXT to move forward. Clicking cancel will terminate installation. 9. This window is testing your connections. Once the bar completes, click NEXT. 10.
Section 5 11. When the progress bar completes, follow the instructions that follow. 12. All tests have been completed for your to start using your VoIP connection. Please click NEXT to exit the Auvi Configuration Wizard. 13. This is the final window to show all tests and configurations have been success fully completed to start using your WIP20S VoIP adapter.
Section 6 Operations This section will describe how to use the Auvi Interface application with Skype™. You will learn how to assign a speed-dial number to a Skype™ contact, and dial using the speed-dial function. 1. After logging into Skype™, double-click the Auvi Interface Shortcut Icon on the desktop to launch the program. 2. The Auvi Interface program should appear on the desktop. Skype_ID Skype_ID 3. To set up speed-dial using the phone connected to the WIP20, click CONTACTS.
Section 6 Basic Operations Guide Below are the basic operations to make and receive calls from the phone connected to the WIP20. Assign a Skype™ user name to a speed-dial using Auvi Interface 1. Open the Auvi Interface and click “Contacts”. 2. Click New and fill in the necessary text fields. 3. Click Save. Call a Skype™ user name using speed-dial 1. Pick up telephone handset connected to the WIP20. 2. Listen for the dial-tone. 3. Dial the two-digit speed-dial number, followed by “#”.
Troubleshooting Section 7 My computer will not verify the phone keys during installation It normally takes two (2) or three (3) cycles for all the keys to be recognized. After each cycle, hang up the telephone and wait for the program to reset. Also, depending on the type of phone you have connected to the WIP20, you may need to press each key for one (1) second during the cycle phase. Skype™ is running but I do not hear a dial-tone - Make sure the speaker levels are not muted and adjust appropriately.
Limited Warranty Section 8 Auvi Technologies warrants this product for the original purchaser to be free from defects in material and workmanship, under normal conditions, for a period of 90 days for parts and labor and 1 year for parts only from the date of original purchase. Auvi Technologies agrees at our option during the warranty period to repair any defect in material or workmanship or to furnish an equal product in exchange without repair charges during the first 90 days.
