User guide

The Repeater Panel - Overview
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FB/FE Rev. A, 010531,
Autronica Fire and Security AS
Page 5
2. The Repeater Panel - Overview
2.1 Introduction
The Repeater Panel is intended to give information related to fire
alarms in the relevant Operation Zone and allow the fire brigade to
operate fire alarms.
The panel is used to silence and resound sounders, and to reset fire
alarms within a defined operation zone.
Each panel is assigned to one operation zone. Relative to its own
zone, a panel is local while it is remote to all other operation zones.
All events and actions occurring in a particular operation zone must be
handled from a local panel.
The whole system can be reset from this panel, provided that the
panel's relation to the operation zone is defined this way.
The panel displays information on fire alarms occurring in all operation
zones. However, the level of details of the given information depends
on which operation zone the information is related to.
Power
Fire Brig. Signalled
Function Delayed
Function Disabled
Mute Panel
Silence Alarms
Reset
More Events
Fault
AUTROSAFE
SelfVerify
ALARM