User guide

Introduction
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FB/FE Rev. A, 010531,
Autronica Fire and Security AS
Page 3
1. Introduction
1.1 About the Manual
This manual is intended to provide the information necessary to
operate the AutroSafe Interactive Fire Alarm System from the
Repeater Panel, BU-320.
1.2 The Reader
The handbook is intended to be used by the fire brigade and personnel
who are responsible for operating the system. We assume the reader
has the necessary basic understanding of the system concept and the
term zone including, Detection Zone, Alarm Zone and Operation Zone
(refer to System Specification).
The AutroSafe Interactive Fire Alarm System comprises various
components (see chapter 1.0). It is important that the reader gets
familiarized with these, plus the different terms and abbreviations
(shown in Appendix).
1.3 Reference Documentation
In addition to this handbook, the AutroSafe Interactive Fire Alarm
System consists of the following documentation:
Handbook Item Number
System Specification P-ASAFE/XE
Installation Handbook, Fire Alarm Control Panel (BS-310/320) / Controller (BC-320) P-ASAFE-FA/DE
Installation Handbook, Operator Panel (BS-330) P-ASAFE-OP/DE
Installation Handbook, Repeater Panel (BU-320) / Information Panel (BV-320) P-ASAFE-RI/DE
Installation Handbook, Battery Cabinet (SY-310) P-ASAFE-BC/DE
Commissioning Handbook P-ASAFE/EE
Operator’s Handbook, Fire Alarm Control Panel (BS-310/320) / Operator Panel (BS-330) P-ASAFE-FO/FE
Operator's Handbook, Information Panel (BV-320) P-ASAFE-IN/FE
Shortform User Guide P-ASAFE-SH/LE
Shortform Configuration Guide (for the AutroSafe Demo Board) P-ASAFE-SH/VE
Wall Chart P-ASAFE-WE/LX
Wall Chart P-ASAFE-CH/LX
Menu Structure P-ASAFE/MX
User Guide, Loop Diagnostic Tool, AS-2000 P-ASAFE-AS/FE
User Guide, Loop Simulator Tool P-ASAFE-LS/FE
User Guide, Loop Calculator Tool P-ASAFE-LC/FE
User Guide, Merge Tool P-ASAFE-MT/FE
User Guide, Power Calculator Sheet P-ASAFE-PC/FE