User guide

The Repeater Panel - Overview
Operator's Handbook, AutroSafe Interactive Fire Alarm System, Release 3, ASAFE-FB/FE Rev. A, 010531,
Autronica Fire and Security AS
Page 9
2.5 Internal Buzzer
Each Repeater Panel provides a buzzer which is activated as
described below. Each condition may have its own sound pattern. If
more than one condition is present simultaneously, the state of the
operator panel and the buzzer signal will be decided. The buzzer will
reflect the condition which has the highest priority.
The internal buzzer is controlled by hardware. It is activated in the
cases of:
• System Fault
• Alarm
• Prealarm
• Fault
• Early Warning (not yet implemented)
The buzzer can be silenced by pressing the Mute Panel button. One
exception is the buzzer signal indicating System Fault which can not
be silenced.
If the reason for the buzzer signal still exists, the buzzer will resound
after a predefined time.