User guide

Inserting / Feeding Paper for the Optional Printer
Commissioning Handbook, AutroSafe Interactive Fire Alarm System, Release 3, P-ASAFE/EE Rev. E, 2005-02-16,
Autronica Fire and Security AS
Page 45
2. Open the frontpanel.
3. Make sure that the end of the paper roll has a clean 90
o
cut.
4. Insert the end of the paper roll
- pointing upwards- between
the small horizontal metal
bracket and the front panel as
shown on the drawing below,
align the edges of the paper,
then slightly move the paper
upwards until the paper is fed.
5.
When the paper comes through the paper slot on the front side,
press 3 on the front side of the panel to stop the paper feeding.
Front Panel
Paper pointing upwards
Metal bracket