User guide

Upgrading System Software
Commissioning Handbook, AutroSafe Interactive Fire Alarm System, Release 3, P-ASAFE/EE Rev. E, 2005-02-16,
Autronica Fire and Security AS
Page 42
8.5.7 Rebooting the System
When the System Software is downloaded to target, the system unit
has to be rebooted.
• Press the Reset button (S5) on the Display Board BSR-310.
• As the Controller is not equipped with the Display Board, reset is
performed by pressing the reset button (X1) on the Processor
Board EAC-300.
Applies
to
BS-310
BS-320
BS-330
BV-320
BU-320
Applies
to
BC-320