User guide

Upgrading System Software
Commissioning Handbook, AutroSafe Interactive Fire Alarm System, Release 3, P-ASAFE/EE Rev. E, 2005-02-16,
Autronica Fire and Security AS
Page 41
8.5.6 Re-placing the Jumpers
When the downloading is completed, the jumpers are to be moved
back to their original positions.
• Move the jumper back to its original position X17 on the Display
Board BSR-310.
• Move the jumper at position JP1 back to its original position (the
two uppermost pins on the Processor Board EAC-300).
JP1